Some customers also need 6 layer sintered metal filters. Its standard construction is similar to the 5 layer sintered wire mesh, but with an additional sixth layer of 12 mesh coarse mesh.

Here is the common structure.

100 + Filter control layer + 100 + 12 x 64 + 64 x 12 + 12

  • Firstly, the filtering mesh is the second layer, and placed in two 100 mesh plain weave wire meshes.
  • And then we usually put these three layers on two 12×64 dutch weave mesh.
  • Finally, adding a 12 mesh coarse woven wire mesh as the sixth layer.

Thanks to this reinforcing sixth layer, 6 layer sintered metal mesh becomes more stronger than 5 layer sintered plate. In addition, the thickness becomes much thicker, and reaches about 3.5mm.

Micron Size6 Layer Structures
1100 + 400 x 2800 + 100 + 12 x 64 + 64 x 12 + 12
2100 + 325 x 2300 + 100 + 12 x 64 + 64 x 12 + 12
5100 + 200 x 1400 + 100 + 12 x 64 + 64 x 12 + 12
10100 + 165 x 1400 + 100 + 12 x 64 + 64 x 12 + 12
15100 + 165 x 800 + 100 + 12 x 64 + 64 x 12 + 12
20100 + 200 x 600 + 100 + 12 x 64 + 64 x 12 + 12
25100 + 80 x 700 + 100 + 12 x 64 + 64 x 12 + 12
30100 + 450 + 100 + 12 x 64 + 64 x 12 + 12
40100 + 325 + 100 + 12 x 64 + 64 x 12 + 12
50100 + 270 + 100 + 12 x 64 + 64 x 12 + 12
60100 + 250 + 100 + 12 x 64 + 64 x 12 + 12
75100 + 200 + 100 + 12 x 64 + 64 x 12 + 12
100100 + 150 + 100 + 12 x 64 + 64 x 12 + 12
120100 + 120 + 100 + 12 x 64 + 64 x 12 + 12